Browsing Department of Mechanical Engineering by Issue Date

Now showing items 1-20 of 331

    • Paddle Powered Can Crusher With Conveyor 

      Mostaqul, Md. (2019-07-10)
      A can crusher is a device which is used for squashing food and beverage cans, beer cans to save space for recycling. The disposal of the used cans compose a problem because the empty cans occupy space. Also the transport ...

    • Construction of Solar Automated Water Irrigation system controlled by Mobile messaging 

      Alom, Md. Shahin (Sonargaon University (SU), 2020-01-01)
      The traditional irrigation system involves most manual labor intensive task. Farmers usually work on large portions of land to grow different types of crops. It is not always possible for one person to be able to keep track ...

    • Retrofitting of Backup Air-Conditioning System In Air- Conditioned Vehicle 

      Md. Mizanur Rahman, BME-200282; Rahman Tipu, Md. Masudur; Mahmud, Md. Tanjil (Sonargoan University, 2020-01-10)
      This thesis has been performed for the design of backup air conditioning system of interior of the car. Air conditioning system is mainly used in passenger and commercial vehicle. The purpose of this system is to make ...

    • Design and Fabrication of a U tube type BFU Heat Exchanger 

      Md. Nesar Uddin, BME-200276; Habib, Ahsan; Kabria, Md. Golam; Adnan, Md. Sakil (Sonargoan University, 2020-01-15)
      A heat exchanger is an equipment used for transferring heat from one medium to another. There is a wide application of u tube type heat exchanger in the field of industrial applications for its enhanced heat transfer ...

    • Design and Fabrication of Pneumatic Sheet Cutting Machine 

      Md. Reza Hossain, BME-200290; Kamal, Mohammad; Ahmed, Md. Jakir; Abdullah, Md. Eusuf (Sonargoan University, 2020-01-15)
      Usually the sheet metal cutting machine is manually hand operated for medium and small scale industries. This paper gives an insight about the pneumatic sheet metal cutting machine. Any pneumatic machine aimed for ...

    • Design, Construction and Onstruction and Performance Test of a Remote Controlled Scissor Jack 

      Ismail Hossain, BME-200371; Jewel, Md.; Islam, Md. Ariful; Hasan Sarker, Md. Rashadul (Sonargoan University, 2020-01-15)
      A Scissor Jack is a mechanical device used to easily lift a vehicle off the ground, to gain access to sections underneath vehicles or to change the wheel. The most important fact of a jack is that it gives the user a ...

    • Experimental Study of Solar Home System 

      Md. Osman Gony Lalon, BME-200375; Ahammed, Md. Tanvir; Saha Jalal, Gazi Mohammad; Shahnewaz; Asif Nihal, Asif (Sonargoan University, 2020-01-19)
      Solar energy is one of the most popular form of renewable energy. The use of solar panel is increasing rapidly all over the world. Fortunately, the location of Bangladesh is quite suitable for harnessing solar energy. ...

    • Design and Construction of a low cost Laptop 

      Babu, Delower Hasan; Parvez, Md. Masud; Hossain, Md. Millat (Sonargoan University, 2020-01-24)
      A laptop computer, commonly shortened to a Desktop computer, is a mobile device, typically with a mobile operating system and touchscreen display processing circuitry, and a rechargeable battery , thin and flat package. ...

    • Formulation of Biofuel From Neem Oil 

      Nazmul Huda Babu, BME-200321; Faruque, Omur; Alom, Jahanggir (Sonargoan University, 2020-01-24)
      The contribution of neem as a source for biodiesel production will be of great importance in the coming day. In India Neem tree is a widely grown up termed as a divine tree due to its wide relevance in many areas of study. ...

    • STUDY OF THE CONVENTIONAL HVAC SYSTEM AND DEVELOPMENT OF AFFORDABLE VENTILATION SYSTEM 

      MD. MAMUN, BME-200345; SHAHIDULLAH, S M; HOSSAIN, MD. MELON; ALI KAWSIR, MOHAMMED (Sonargoan University, 2020-01-24)
      Ice based Cool Thermal Energy Storage (CTES) systems have attracted much attention during last few decades. The reasons are mainly of economic and environmental nature. Compared to conventional refrigeration and air- ...

    • Design and Construction of a 360 Degree Flexible Drill Machine 

      Md. Rashidu Islam, BME-200349; Bhuiyan, Sazedur Rahman; Uddin, Md. Jasim; Bishwas, Md. Shakil; Hasan, Bijoy (Sonargoan University, 2020-01-24)
      Our project is rotated to easily drill at any direction. So that job setting operation is not complicated as well as reduces the setting time for the operation. It also takes into consideration the most effective method ...

    • Biofuels Extraction through Pyrolysis of Plastic Waste 

      Rahman Akon, Md. Mejanur (2020-01-29)
      Demand for energy is increasing in an alarming rate. This is due to the rapid outgrowth of population and urbanization. Conventional energy sources are not sufficient to face the phenomena of energy shortage. In this ...

    • Design and Fabrication of Android Operated Fire Fighting Vehicle 

      Rason Chakma, BME-200285; r Rahman, Md Shohanu; Rana, Md Masud; Gani, Osman (Sonargoan University, 2020-02-01)
      Automatic fire reorganization with smart security system is now a days used worldwide for better safety and security. In the recent year, Vehicles are turned out to be an ingredient over which many people had shown their ...

    • Fabrication and Performance Of Dual Axis Solartracker System 

      Khan, Md. Mahabub Khan (2020-02-02)
      Nowadays, Solar panel has been used increasingly in recent years to convert solar energy to electrical energy. The solar panel can be used either as a stand-alone system or as a large system that is connected to the ...

    • Temperature Reduction of an Active Solar House by Using Chimney and Comparison of Room Temperature with the Conventional One. A Thesis Submitted to the 

      Rahman, Md. Toufiqur; Hasan, Md. Nahid; Arefin, Mahmud; Hassan, Md. Abid (2020-02-03)
      Solar Temperature reduce is another efficient use of renewable energy technology to help cool our homes and work places. The necessity for air-conditioning for our homes in hot areas around the world and the abundance of ...

    • Construction and Performance Analysis of Savonius Vertical Axis Wind Turbine 

      Rahman, Md. Atikur; Sharif, Md. Bellal; Hossain, Md. Rubel; Sumi, Sabrina Akter (2020-02-03)
      In the current age of global energy crisis, the production of energy through alternate energy resources has gained a significant attention. Wind as a source of energy is a very attractive due to the fact that fuel is free ...

    • Industrial Product Distinguisher With Modern Control System 

      Abedin, Md. Joynul (2020-02-03)
      For distinguishing object in industry optical sorting is very much convenient. Color and size are the most important features for accurate classification and distinguishing of product which can be done by using some ...

    • “Design and Construction of IOT BOT” 

      Sourov, Khandaker Abu Zarif (2020-02-03)
      IOT Chatbots, or conversational interfaces as they are also known, present a new way for individuals to interact with computer systems. Traditionally, to get a question answered by a software program involved using a ...

    • Design and Fabrication of Three-way Unloading Machine 

      K.M Tariqul Islam, BME-200294; Shekh, Md. Sahajada; Aditya, Protik; Hossain, Md.Monir (Sonargoan University, 2020-02-03)
      In industrial and domestic considerations, tippers can pull a variety of products including gravel, grain, sand, fertilizer, heavy rocks. the older dropping trolley or dumper has been conceived by observing the difficulty ...

    • Energy Storage From Speed Breaker(Power Hump) 

      Hossain, Md. Alomgir; Islam, Md. Olif; Rahman, Mizanur; Kabir, Md. Humyon (Sonargoan University, 2020-02-04)
      ABSTRACT Energy is the primary need for survival of all organisms in the universe. Everything what happens in the surrounding is the expression of flow of energy in one of the forms. But in this fast moving world, ...